GY-68 Temperature Pressure Module

ماژول دما و فشار

Measuring the absolute pressure of the enviroment using a digital barometer such as this has some interesting applications.By Converting the pressure measured into altitude, You have a relible sensor for determining the height of your robot, plane or projectile

Using a sensor as capable as the BMP180 you can achieve accurary of 1m, with noise of only 17cm in ultra high resolution noise

The device will operate at only 0.3uA meaning lowcurrent draw for battery powered applications

The BMP180 comes fully calibrated and ready to use. As the device operates over I2C we've added optional I2C pull ups that can be enabled using yje PU (pull up) jumper on the board for your convenience and ease during breadboarding

Using I2C, the device provides pressure and temperature as 16bit values, which are used along with calibration data within the device are used to provide a temperature compensated altitude calculation

This device is really easy to use, if your thinking of using it with an Arduino then you need to check out our BMP180 Arduino tutorial features

1.8V to 3.6V Supply Voltage

Low power consumption - 0.5uA at 1Hz

I2C interface

Max I2C Speed: 3.5Mhz

(Very low noise - up to 0.02hPa (17cm

Full calibrated

(Pressure Range: 300hPa to 1100hPa (+9000m to -500m

Weight: 1.18g

Size: 21mm x 18mm

نوشتن نظر

نام شما:


نظر شما: توجه : HTML ترجمه نمی شود!

رتبه: بد           خوب

کد امنیتی را در کادر زیر وارد نمایید: