[ Model ]: E50-TTL-500
[ Interface ]: UART
[ Power ]: 27dBm
[ Distance ]: 5000m
[ RF connector]: SMA-K
[ Frequency ]: 170MHz (148 ~ 173.5MHz)
[ Feature ]: E50-TTL-500 is a 27dBm wireless transceiver module. It operates at 148-173.5MHz and provides an easy way to use. Due to the low frequency, the module features strong penetration and diffraction ability. It is highly recommended for the complicated situations with obstacles.
1 |
Size |
21 * 36mm(without antenna) |
2 |
Frequency Band |
148-173.5MHz |
3 |
Connector |
1 * 7 * 2.54mm,Plug-in |
4 |
Supply voltage |
2.3 – 5.5V DC |
5 |
Communication level |
MAX 5.2V |
6 |
Operation Range |
About 5000m(test condition:clear and open area& maximum power,antenna gain: 5dBi,height:> 2m,air date rate: 1Kbps) |
7 |
Transmitting power |
Maximum27dBm(500mW)| four optional level(0-3),step by 3dBm |
8 |
Air data rate |
Default 1kbps,can be configured to 1,2,5,8,10,15,20,25Kbps |
9 |
Sleep current |
2.0uA(M1 =1,M0 = 1) |
10 |
Transmitting current |
390mA@27dBm |
11 |
Receiving current |
16.5mA(mode 0 or mode 1)
|
12 |
Communication interface |
UART, 8N1,8E1,8O1, eight kinds of UART baud Rate, from 1200 to 115200 bps |
13 |
Drive mode
|
UART can be configured to push-pull/high pull, open-drain UART |
14 |
Transmitting lengthv |
512 bytes buffer,58 bytes per package |
15 |
Receiving length |
512bytes buffer,58 bytes per package |
16 |
Address |
65536 configurable addresses(easy for network, broadcast and fixed transmission) |
17 |
RSSI support |
Built-in intelligent processing |
18 |
Antenna type |
SMA-K |
19 |
Operating temperature |
-40 ~ +85℃ |
20 |
Operating humidity |
10% ~ 90% relative humidity, without condensation |
21 |
Storage temperature |
-40 ~ +125℃ |
22 |
Sensitivity |
-121dBm@1kbps |