دسته بندی ها

Mini STM32 board alientek with 2.8 inch LCD

Mini STM32 board alientek with 2.8 inch LCD

مدل کالا: embedded
موجودی: پیش سفارش
قیمت: 132,000تومان

شرح مختصر

این محصول بسیار ارزان بوده و برای پروژه های میکروکنترلری که نیاز به پردازشی فراتر از AVR دارند بسیار مناسب می باشد.

این محصول دارای ویژگی های زیر است:

  • تا 120 مگاهرتز پردازنده کورتکس M3
  • تا 1 مگابایت حافظه فلش
  • 128 + 4 کیلو بایت RAM
  • دارای ال سی دی
  • دارای اس دی کارت
  • دارای پورت های یو اس بی، OTG، آر تی سی، پی اس تو و ...

 

CPU: ARM Cortex M3 up to 120MHz (ST)

Flash: up to 1MB Flash memory

RAM: 128 + 4KByte

LCD: Parallel LCD support

External Memory: SD/MMC

Other: USB OTG, x17 Timers, JTAG, RTC, PS2 ...

مشخصات فنی

 

این محصول بسیار ارزان بوده و برای پروژه های میکروکنترلری که نیاز به پردازشی فراتر از AVR دارند بسیار مناسب می باشد.

DVD همراه محصول به زبان چینی می باشد و کاربر باید با استفاده از translate.google.com آن ها را ترجمه کند.

این محصول دارای ویژگی های زیر است:

  • تا 120 مگاهرتز پردازنده کرتکس M3
  • تا 1 مگابایت حافظه فلش
  • 128 + 4 کیلو بایت RAM
  • دارای ال سی دی
  • دارای اس دی کارت
  • دارای پورت های یو اس بی، OTG، آر تی سی، پی اس تو و ...

STM32 development board on-board resources as follows:
- STM32F103RBT6, TQFP64, FLASH: 128K, SRAM: 20K
- A standard JTAG / SWD debug port download
- 1 Power indicator (blue)
- 2 status indicator (DS0: red, DS1: green)
- An infrared receiver, equipped with a small infrared remote control
- An IIC interface EEPROM chip, 24C02, capacity 256 bytes
- An SPI FLASH chip, W25X16, capacity of 2M bytes
- A DS18B20/DS1820 reserved interface temperature sensor
- A standard 2.4/2.8 inch LCD interface, support for touch screen
- An OLED module interface
- 1 USB port, can be used for program download and debug code
- A USB SLAVE interface for USB communication
- An SD card interface
- 1 PS / 2 interface, external mouse, keyboard
- Group 1 5V power supply / access port
- 1 set of 3.3V power supply / access port
- A start configuration interface mode selection
- 2 2.4G wireless communication interface (24L01 and JF24C)
- An RTC backup battery holder, and with battery
- A reset button, can be used to reset the MCU and LCD
- 3 function buttons, both of which WK_UP Wake
- A power switch that controls power to the entire board
- In addition to the crystal occupied by the IO estuary, leads all the rest of all the IO port, which leads to order GPIOA and GPIOB
- From the above-board resources can be seen, MiniSTM32 development boards onboard resources are very rich, coupled with the flexibility of design, make your development easier.
- Second, the development board features
- ALIENTEK MiniSTM32 development board features include:
- 1) small. The board size is 8cm * 10cm * 2cm (including LCD, but does not calculate the height of studs).
- 2) flexible. Board in addition to all of the crystal outside the IO port all the leads, in particular, there GPIOA and GPIOB IO port is based on the order of leads, and can greatly facilitate the expansion and use of, the other board features a unique one-click download, to avoid frequent set B0, B1 trouble, a key on the computer directly to download.
- 3) rich in resources. A dozen onboard peripherals and interfaces, so you swim STM32.
- 4) The tutorial is complete. A total of 29 instances, each instance of the code are detailed notes (ucGUI except instances). And with more than 480 pages, 12 million words about the tutorial, so you completely Fun STM32. And specially designed for beginners to start making a video tutorial, taught you how to learn STM32!
- Third, the invoice
- Package 1) The board LCD J LINKE V8 emulator set
- 1. ALIENTEK MiniSTM32 board a development board.
- (2) 2.8-inch TFTLCD module (resolution: 320 * 240, with a touch screen, no cottage icon) one.
- 3.USB cable 1 (for downloading, power supply, commissioning, triple).
- 4 Disc 1 (including the "STM32 incomplete manual", example source code, schematics, datasheets, and other information and software).
- 5, an infrared remote control
- 6, J LINKE V8 emulator set
- Note that this package does not contain the SD card, SD card if necessary, please purchase separately, in remote areas can only take air courier companies to regional, remote control without batteries and motherboard battery, the battery can not go back to the air
- You have seen pictures of each baby has a description of the corresponding source code, are open source, with the CD-ROM comes ...... CD-ROM and our "STM32 incomplete manual" and we used to download the tool development process, compilation tools, chip s manuals and other information tools, etc., increasing source extension experiments, there are 13 expansion experiment for all to learn ...
- Development board supporting tutorial "STM32 incomplete manual V2.0" pdf electronic version of the more than 480 pages, 29 experiments detailed explanation, plus 12 extension experiments, a total of 41 experiments are all open source (register version of the library function version)
- MiniSTM32 V1.8B version of the development board is now officially shelves! V1.8B version of MiniSTM32 development board, the relative previous version, V1.8B version of the more humane, V1.8B version has the following characteristics:
- 1, a new unique one-click download circuit, download the code without the need for jumpers and switches, easier to use.
- 2, using gold-plated copper pin, access to more reliable and more durable.
- 3, the use of custom LCD and wireless module connector plate is more beautiful.
- 4, the DS18B20 placeholder, using gold-plated female hole for easy installation and removal of the DS18B20.
- 5, more perfect and user-friendly layout

نوشتن نظر

نام شما:


نظر شما: توجه : HTML ترجمه نمی شود!

رتبه: بد           خوب

کد امنیتی را در کادر زیر وارد نمایید:



برچسب ها: embedded, board
. Theme developmed by tnm-group.com